尊龙凯时人生就是博

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

100G-CFP4-100

100G-CFP4-100

0.0/5 rating (0 votes)

Description

Product Description

    100G-CFP4-100 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-SR4) and 112G OTN according ITU-T G.959.1 applications using four by parallel physical fiber separated data lanes on each direction . 100G-CFP4-100 operating over four pairs of OM4 Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 1.9 dB, with in most cases is enough to reach about 100 m distance, however, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. For each direction, this transceiver use 4xVCSEL diode transmitters operating at 850nm and 4 x PIN photodiode receivers for each data lane. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. 100G-CFP4-100 operates in Standard 0°-70°C temperature range and has MPO-12 interface. CFP4 SR4 100G transceiver support 103.1 Gbps – 112 Gbps data rate and such applications as 100G Base SR4 for LAN and 112G OTU-4 for OTN WAN. Most popular applications for CFP4 SR4 100G is LAN Ethernet connections for Datacom and optical transport networking (OTN).

   CFP4 SR4 100G Transceiver is CE/RoHS certified and it is Compliant with relevant product safety standards. 100G-CFP4-100 is fully compliant to CFP MSA CFP4 Hardware Specification, Revision 0.2. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide CFP4 transceiver with custom-encoded firmware in order to make it work almost in any equipment supporting CFP4 form-factor. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and EEPROM memory data validation tests.

Key Technical Data
Media Type:

4 Lanes of MMF

TX Wavelength:

850 nm.

RX Wavelenght:

850 nm.

Minimum Optical Budget:

1.9 dB

Maximum Distance:

100 m (OM4) / 70 m (OM3)

Supported Data Rate:

103.125 to 112.2 Gbps

Supported Applications:

100G Ethernet (103.125Gbps), OTU4 (112Gbps)

DDM/DOM:

Support

Temperature Range:

Standard 0°-70°C

Connectors:

MTP/MPO

Tx Wavelength Bandwidth:

20 nm (840-860 nm)

Rx Wavelength Bandwidth:

20 nm (840-860 nm)

Minimum Transmitting Power:

Each Lane -8.4 dBm

Maximum Transmitting Power:

Each Lane 2.4 dBm

Receiver Sensitivity:

Each Lane -10.3 dBm

Receiver Overload:

Each Lane 2.4 dBm

Transmitter Type:

VSCEL Laser

Receiver Type:

PIN photodiode

Power:

+3.3V single power supply

Compliance:

100G-Base-SR4, CE, CFP4 MSA, Class 1 FDA and IEC60825-1 Laser Safety Compliant, IEEE 802.3ba, RoHS

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ