F-tone Networks's Free Space Isolators are used in various TOSAs, which require isolation to prevent feedback into the laser. This product is available in single and double stage designs. The Free Space Isolators offer excellent performance with low insertion loss and high isolation. F-tone Networks’s proprietary bonding process, combined with years of volume manufacturing experience, results in a high reliability record. Bare isolator chips survive more than 5,000 hours of damp heat testing without delamination.
- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
标准光模块
标准协议光模块
- 天下产化光模块
- 25G~400G高速光模块
- 200km超长距光模块
- 5G移动通讯光模块
- SFP光模块
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- HDMI
- Video SFP光模块
- Copper SFP
- 低功耗SFP
- SFP+光模块
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- QSFP光模块
- QSFP+ 光模块
- QSFP28光模块
- QSFP-DD光模块
- MicroQSFP光模块
- OSFP 400Gbps
- XFP光模块
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模块
- CSFP光模块
- CSFP+10G光模块
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- CXP光模块
- CFP光模块
- CFP2光模块
- CFP4光模块
- CFP8 400Gbps
- CDFP 400Gbps
- DSFP光模块
- FT-61光模块
- OLT光模块
- ONU光模块
- PLCC光模块
- RJ光模块
- SFF光模块
- SFP-DD光模块
- SFP28光模块
- SNAP12光模块
- USOT光模块
- X2光模块
- Xenpak光模块
- 光电编码器模块
- 光模块测试板
- 光模块笼子座子
- DAC 高速线缆
- 光纤滑环|光电滑环
- 光缆车
- 军品级DIN光模块
- 塑料光纤模块
- 替换安华高工业电力光模块
- 兼容国产化替换安华高光耦
- 射频光模块
- 微型多路光模块
- 特种光模块
- 特种光纤毗连器
- 特种光电毗连器
- USB光纤延伸线
- 特种电毗连器
- 特种光纤光缆
- 光藕
- SMA测试线缆
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纤温度传感器
- 光纤应变传感器
- 光纤加速率传感器
- 光线压力传感器
- 光纤位移传感器
- 光纤应力传感器
- 光纤传感剖析仪
- 光纤漫衍式测温主机
- 光纤布里渊信号解调仪
- 漫衍式光纤声振信号解调仪
- Camera Link
兼容协议光模块
- 华为光模块
- 思科光模块
- 华三光模块
- 中航光电光模块
- 中兴光模块
- 锐捷光模块
- 惠普光模块
- 神州数码光模块
- Juniper光模块
- Extreme光模块
- Brocade光模块
- D-Link光模块
- 赫思曼光模块
- 阿尔卡特朗讯光模块
- Allied Telesis光模块
- Foundry光模块
- Force10光模块
- Blade光模块
- Linksys光模块
- Marconi光模块
- 博达光模块
- 网件光模块
- Nortel光模块
- Moxa光模块
- 海康威视HIKVISION光模块
- McAfee光模块
- SMC智邦光模块
- 安华高Avago光模块
- 飞通光模块
- Finisar光模块
- yellobrik SDI光模块
- 罗克韦尔AB光模块
- 罗杰康光模块
- 研华Advantech光模块
其它种类光器件
- 天下产化光器件
- 光纤阵列系列
- 高速模块微毗连
- 相关通讯光毗连
- 硅光子器件光链接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纤放大器
- 光纤传感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光开关
- 探测器
- 光功率计
- 全光纤相位拉伸器
- 光纤准直器
- 光衰减器系列
- 光偏振控制器
- 光源
- 光环行器Circulator
- 光纤延迟线
- 色散赔偿模块
- 光纤放大器
- 无源传输转换器
- 光纤激光器
- 光调制器
- 光电探测器
- 光纤偏振
- 光纤滤波器
- 同轴激光器
- 同轴电缆
- 光纤法兰适配器
- 光纤跳线&尾纤
- SMA-特殊纤芯系列
- 特殊讨论系列
- 铠装系列
- 光耦合器Coupler
- 皮纤跳线系列
- 大芯数系列
- 回路跳线系列
- 保偏光纤系列
- 光通讯组件
- 光隔离器isolator
- 其它光器件
- 可调滤波器
- 可调衰减器
- 拉锥耦合器
- 无源光器件
- 法拉第旋转镜
- 波分复用器
- 滤波器
- 蝶形激光器
- 光耦合器&分路器
- 光纤环形器&法拉第旋转镜
- 光纤隔离器&波分复用器
- 光纤分束器&合束器（PBS/PBC）
- 光纤光栅
- 高速线缆
手艺支持
Free Space Isolator
Description
一、主要特征
二、类型
Type: Isolators
|
Parameters |
Units |
Specification |
|
CWL |
nm |
1270 ~ 1610 |
|
Operating wavelength |
nm |
+/-20 |
|
Insertion loss |
dB |
< 0.3 |
|
Min. Isolation |
dB |
> 20 |
|
Clear aperture |
mm |
> 0.8 diameter |
|
Tilt angle |
DEG |
6 +/- 1 |
|
Operating temperature |
°C |
-40 to 85 |
|
Storage temperature |
°C |
-40 to 85 |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G 850nm PIN + Preamp - LC ROSA with RSSI
The FT-D6180-421 uses a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for 10Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50mm or 62.5mm multi-mode fiber.
The FT-D6180-421 is designed to be paired with Advanced Optical Components FT-E6x9x VCSEL 10Gbps TOSA products (see data sheets for FT-E6x9x products).
SFP+ Bail and Latch Assembly
These parts are designed to provide the latching and release mechanism for pluggable SFP+ modules. Finisar offers the bail and latch as piece parts for external sale to module manufacturers for use within particular modules. The bail is available in various colors as listed in the Product Features tab.
1/2/4/8 Gb/s 850nm VCSEL - LC TOSA
The FT-E7192-xxx uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 1/2/4/8 Gbps data communication over multimode optical fiber for the ANSI X2.T11 Fibre Channel protocols. The optical assembly is designed to interface either 50μm or 62.5μm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
10 Gb/s 1310nm DFB Laser Diode - LC TOSA
The DFB-1310-10LR-LCA is specifically designed for applications based on several optical communications standards, including IEEE 10GBASE-LR, STM64, STM64 FEC, 10GFC, 10G GbE, 10G GbE FEC and 10GFC FEC. Excellent optical performance is achieved by matching the electrical characteristics of the TOSA and laser to the external circuitry. The TOSA is designed to be paired with the 10G LR ROSA PIN-1310-LR-x.
CW Tunable Laser - Butterfly Package
The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.
Receptacle Isolator
Receptacle Isolators are generally used in various TOSAs that require isolation to prevent feedback into lasers. F-tone Networks's Receptacle Isolators offer excellent performance with low insertion loss and high isolation. F-tone Networks's proprietary bonding process, combined with years of volume manufacturing experience, results in a high reliability record. Bare isolator chips survive more than 5,000 hours of damp heat testing without delamination.