尊龙凯时人生就是博

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

25G-SFP28-40RX

25G-SFP28-40RX

0.0/5 rating (0 votes)

Description

Product Description
    25G-SFP28-40RX is a 25GBASE-ER RX Only SFP28 Multi-Vendor MSA Compatible SFP28 (Small Form-Factor Pluggable 28) Transceiver. As global online traffic is asymmetrical – especially this statement is valid nowadays when biggest share of global traffic is video streaming, there is much more downlink traffic then uplink. To address this challenge and help engineers design networks more cost efficiently 25GBASE-ER RX Only comes in play. 25GBASE-ER RX Only doesn’t have Transmitter, it only has APD (Avalanche photodiode) receiver comparing to classical 25GBASE-ER module which has both components. 25GBASE-ER RX Only operates over Single Fiber Single-Mode Fiber (SMF) optical cable. Module has guaranteed average receiver sensitivity (Min) -19 dBm, which in most cases is enough to reach 40 km over OS2 fiber. 25G-SFP28-40RX 25GBASE-ER RX Only SFP28 supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. 25G-SFP28-40RX operates in Standard 0°-70°C temperature range and has Single LC interface. 25G-SFP28-40RX 25GBASE-ER RX Only SFP28 SFP28 support 8.5-28.1 Gbps data rate and is designed for 25G Ethernet (25.78 Gbps) and 10G Ethernet (10.31 Gbps) applications. 25G-SFP28-40RX SFP28 Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP) Access and Metro Networks, Data Center Core Networks and Enterprise Campus Networks to address traffic asymmetry challenge, and as well can be used in networking scenarios where Deep Packet Inspection (DPI) is performed.

    25G-SFP28-40RX 25GBASE-ER RX Only SFP28 SFP28 transceiver is CE/RoHS certified and is compliant with product safety standards. 25G-SFP28-40RX is fully compliant to SFF-8431 and SFF-8472 Multi Source Agreement (MSA), IEEE 802.3by 25 Gb/s specification. Consequently, compliance to above standards guarantees that module is compatible and works with majority of networking equipment, where is not implemented special algorithm for protection against third party modules.

Key Technical Data
Media Type:

Single-Mode Fiber (SMF)

TX Wavelength:

na

RX Wavelenght:

1310 nm.

Minimum Optical Budget:

Receiver Sensitivity (Min) -19 dBm

Maximum Distance:

40km

Supported Data Rate:

8.5-28.1 Gbps

Supported Applications:

25G Ethernet (25.78Gbps), 10G Ethernet (10.31Gbps)

DDM/DOM:

Supported

Temperature Range:

Standard 0°-70°C

Connectors:

Single LC

Tx Wavelength Bandwidth:

N/A

Rx Wavelength Bandwidth:

30 nm (1295-1325 nm)

Minimum Transmitting Power:

N/A

Maximum Transmitting Power:

N/A

Receiver Sensitivity:

-19 dBm

Receiver Overload:

-7 dBm

Transmitter Type:

N/A

Receiver Type:

APD Photodiode

Power:

+3.3V single power supply

Chipset:

II-VI, Macom, Neo, Oclaro, Renesas Electronics, MAXIM, SEMTECH, Sumitomo

Compliance:

RoHS-6, SFF-8432, CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, SFF-8402, SFF-8431, SFF-8472, SFP+ MSA

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ