• Transmission data rate up to 11.2Gbit/s per channel
• CFP MSA compliant
• Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
• Up to 11.2 Gbps per channel bandwidth,
• OTU4 compatible
• 10 channels 850nm VCSEL array
• 10 channels PIN photo detector array
• OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
• MDIO digital diagnostic and control capabilities.
• compliant to CFP MSA Management Interface Specification, Draft 1.4
• TX input and RX output CDR retiming
• Hot pluggable electrical interface
• Power class 1 (<8W max)
• Operating case temperature 0¡ãC to +70¡ãC
• 3.3V power supply
• RoHS 6 compliant(lead free)

• 12-channel full-duplex transceiver module
• Hot Pluggable CXP footprint
• Maximum link length of 300m on OM3 or 400m on OM4 Multimode Fiber (MMF)
• Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
• Unretimed CPPI electrical interface
• Requires 3.3V power supply only
• Low power dissipation: <3.5W
• Reliable VCSEL array technology
• Built-in digital diagnostic functions
• Commercial operating case temperature range: 0¡ãC to 70¡ãC
• Single MPO connector receptacle
• RoHS-6 Compliant (lead-free)

    ÇкÏIEEE802.3ahÒªÇó
    Öª×ãµçÐÅÒªÇóPX20+/PX20++
    ¾ßÓÐÇкÏSFF-8472¹æ·¶µÄDDM¹¦Ð§
    ¹âÏ˽ӿÚÊǵ¥ÏËSC/LC½Ó¿Ú»òÕß´øβÏË
    ·¢Éä¶Ë1490nm³¤·¢¹â¡¢1310nmDFPÍ»·¢Ä£Ê½¼¤¹âÆ÷
    ÎüÊÕ1310nm¡¢1490nmµÄPIN/APD¼¤¹âÆ÷
    ÇкÏROSH6µÄ±ê×¼

• Single fiber bi-directional data links asymmetric TX 2488Mbps / RX1244Mbps application
• 1490nm continuous-mode DFB laser transmitter and 1310nm burst-mode APD-TIA receiver
• Small Form Factor Pluggable package with SC/UPC Connector
• Support Class C+ 17~32dB attenuation range application (With FEC)
• Reset burst-mode receiver design support more than 15dB dynamic range
• 0 to 70¡ãC operating temperature
• Single 3.3V power supply  
• Digital diagnostic monitoring interface
• Digital burst RSSI function to monitor the input optical power level
• LVPECL compatible data input/output interface
• LVTTL transmitter disable control
• LVTTL transmitter laser fault alarm
• LVTTL receiver Signal Detect (SD) indication response within 50ns.
• Low EMI and excellent ESD protection
• Class I laser safety standard IEC-60825 compliant
• RoHS-6 compliance 
  

• Single fiber bi-directional data links TX 10.3125Gbps/ Burst Mode RX10.3125Gbps application
• Single fiber bi-directional data links TX 10.3125Gbps/ Burst Mode RX1.25Gbps application
• Single fiber bi-directional data links TX 1.25Gbps/ Burst Mode RX1.25Gbps application
• 0 to 70¡ãC operating case temperature
• 3.3V,5V power supply
• XFP package with SC Receptacle connector
• Hot-pluggable capability
• High power 1577nm EML DFB LD
• High power 1490nm DFB LD
• High sensitivity 1270nm and 1310nm APD
• Support 20km transmission distance with SMF
• Low EMI and excellent ESD protection
• Digital diagnostic monitor interface
• RoHS compliance for FTCX-OLXG-XX

• Single fiber bi-directional data links TX 9.953Gbps/ Burst Mode RX 2.488Gbps application
• 0 to 70¡ãC operating case temperature
• 3.3V, 5V power supply
• Power dissipation<3.5W
• XFP package with SC/UPC Receptacle connector
• Hot-pluggable capability
• High power 1577nm EML DFB LD
• High sensitivity 1270nm APD
• Support 20km transmission distance with SMF
• Low EMI and excellent ESD protection
• Digital diagnostic monitor interface
• RoHS-6 compliance